Installing The Brake Pedal; Installing The Drive Sprocket - Yamaha YZ250F Owner's Service Manual

M
8
2
7
9
5
4

INSTALLING THE BRAKE PEDAL

EAS1SM5205
1. Install:
• Spring "1"
• Brake pedal "2"
• O-rings "3"
New
• Bolt (brake pedal) "4"
Bolt (brake pedal)
26 Nm (2.6 m·kgf, 19 ft·lbf)
• Clip "5"
TIP
Apply the lithium soap base grease on the bolt,
O-rings and brake pedal bracket.
2
3
4
LS

INSTALLING THE DRIVE SPROCKET

EAS1SM5206
1. Install:
• Drive sprocket "1"
• Drive chain "2"
TIP
Install the drive sprocket together with the drive
chain.
3
1
4
5
1
5
8
7
9
2. Install:
• Lock washer "1"
• Nut (drive sprocket) "2"
TIP
Tighten the nut while applying the rear brake.
6
ECA33DD040
NOTICE
Make sure to tighten to specification; other-
wise, it may damage the other part that is
fastened together.
3. Bend the lock washer tab to lock the nut.
4. Install:
• Drive sprocket guide
• Drive sprocket cover "1"
• Bolt (drive sprocket cover) "2"
2
5-9
ENGINE REMOVAL
New
Nut (drive sprocket)
75 Nm (7.5 m·kgf, 54 ft·lbf)
Bolt (drive sprocket cover)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1