Installing The Kick Idle Gear - Yamaha WR250F Owner's Service Manual

2
3. Install:
• Spring guide "1"
TIP
Slide the spring guide into the kick shaft, make
sure the groove "a" in the spring guide fits on
the stopper of the torsion spring.
4. Install:
• Kick shaft assembly "1"
TIP
• Before installation, apply molybdenum disul-
fide grease to the contacting surfaces of the
kick shaft ratchet wheel guide "2" and the kick
shaft stopper "a".
• Apply the engine oil on the kick shaft.
• Slide the kick shaft assembly into the crank-
case and make sure the kick shaft stopper "a"
fits into the kick shaft ratchet wheel guide.
b
a
1
5. Install:
• Torsion spring "1"
TIP
Turn the torsion spring clockwise and hook into
the proper hole "a" in the crankcase.

INSTALLING THE KICK IDLE GEAR

EAS2GB2288
1. Install:
• Kick idle gear "1"
• Washer "2"
• Circlip "3"
New
TIP
• Apply the engine oil on the kick idle gear inner
circumference.
• Install the kick idle gear with its depressed
side "a" toward you.
6-51
KICKSTATER