Removing The Engine; Installing The Engine; Installing The Rider Footrest/Brake Pedal Bracket Assembly - Yamaha WR125R 2009 Service Manual

EAS22B1039

REMOVING THE ENGINE

1. Remove:
• Engine
ECA22B1028
NOTICE
When removing the engine, be careful not to
pull on or damage the wire harness and bat-
tery breather hose with the engine.
TIP
Remove the engine from the right side of the ve-
hicle.
EAS23720

INSTALLING THE ENGINE

1. Install:
• Engine "1"
• Engine rear lower mounting bolt "2"
• Engine rear lower mounting nut "3"
• Engine front upper brackets "4"
• Engine front upper bracket bolts "5"
• Engine front upper mounting bolt "6"
• Engine front upper mounting nut "7"
• Engine rear bracket "8"
• Engine rear bracket bolts "9"
• Engine rear upper mounting bolt "10"
• Engine rear upper mounting nut "11"
• Engine front lower brackets "12"
• Engine front lower bracket bolts "13"
• Engine front lower bracket nuts "14"
• Engine front lower mounting bolt "15"
• Engine front lower mounting nut "16"
ECA22B1029
NOTICE
When installing the engine, be careful not to
pull on or damage the wire harness and bat-
tery breather hose with the engine.
TIP
Do not fully tighten the nuts and bolts.
2. Tighten:
• Engine rear lower mounting nut "3"
Engine rear lower mounting nut
67 Nm (6.7 m·kgf, 48 ft·lbf)
• Engine front upper bracket bolts "5"
Engine front upper bracket bolt
46 Nm (4.6 m·kgf, 33 ft·lbf)
• Engine front upper mounting nut "7"
Engine front upper mounting nut
67 Nm (6.7 m·kgf, 48 ft·lbf)
• Engine rear bracket bolts "9"
Engine rear bracket bolt
33 Nm (3.3 m·kgf, 24 ft·lbf)
• Engine rear upper mounting nut "11"
Engine rear upper mounting nut
67 Nm (6.7 m·kgf, 48 ft·lbf)
• Engine front lower bracket nuts "14"
Engine front lower bracket nut
67 Nm (6.7 m·kgf, 48 ft·lbf)
• Engine front lower mounting nut "16"
Engine front lower mounting nut
67 Nm (6.7 m·kgf, 48 ft·lbf)
4
5
7
1
9
8
11
16
14
12
EAS22B1040
INSTALLING THE RIDER
FOOTREST/BRAKE PEDAL BRACKET
ASSEMBLY
1. Install:
• Rider footrest/brake pedal bracket assembly
Rider footrest/brake pedal brack-
et assembly bolt
62 Nm (6.2 m·kgf, 45 ft·lbf)
5-5
ENGINE REMOVAL
5
6
4
2
15
3
12
10
13