Adjusting The Throttle Grip Free Play; Lubricating The Throttle Cable - Yamaha WR250F Owner's Service Manual

c. Turn the adjuster "2" in direction "a" or "b"
until the specified clutch lever free play is ob-
tained.
Direction "a"
Clutch lever free play is increased.
Direction "b"
Clutch lever free play is decreased.
d. Tighten the locknut "1".
Locknut
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
e. Return the clutch cable cover to its original
position.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
ADJUSTING THE THROTTLE GRIP FREE EAS2GB2091
PLAY
TIP
Prior to adjusting throttle grip free play, the en-
gine idling speed should be adjusted.
1. Check:
• Throttle grip free play "a"
Out of specification  Regulate.
Throttle grip free play
3.0–5.0 mm (0.12–0.20 in)
a
1
b
2
2. Adjust:
• Throttle grip free play
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Loosen the locknut "1".
b. Turn the adjuster "2" until the specified free
play is obtained.
Direction "a"
Throttle grip free play is increased.
Direction "b"
Throttle grip free play is decreased.
c. Tighten the locknut.
EWA
WARNING
After adjusting the throttle grip free play,
turn the handlebar to the right and to the left
to ensure that this does not cause the en-
gine idling speed to change.
2
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS2GB2092

LUBRICATING THE THROTTLE CABLE

1. Remove:
• Cover (throttle cable cap) "1"
• Cover (grip cap) "2"
• Throttle grip cap "3"
3-13
ENGINE
1
b
a