▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS2GB2406
CHECKING THE FUEL INJECTOR
1. Remove:
• Fuel injector
Refer to "THROTTLE BODY" on page 8-7.
2. Check:
• Fuel injector resistance
Out of specification Replace.
Fuel injector resistance
12.0
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Disconnect the fuel injector coupler from the
fuel injector.
b. Connect the pocket tester ( 10) to the
fuel injector coupler.
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
• Positive tester probe
Injector terminal "1"
• Negative tester probe
Injector terminal "2"
1
c. Measure the fuel injector resistance.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
1 2
2
ELECTRICAL COMPONENTS
9-81