Removing The Silencer; Removing The Exhaust Pipe 2; Removing The Drive Sprocket - Yamaha WR250F Owner's Service Manual

REMOVING THE SILENCER

EAS2GB2229
1. Remove:
• Rear shock absorber assembly lower bolt
"1"
• Connecting arm bolt (frame side) "2"
• Silencer "3"
TIP
Move the rear shock absorber to the left side of
the chassis, and remove the silencer.
2
3

REMOVING THE EXHAUST PIPE 2

EAS2GB2230
1. Remove:
• Exhaust pipe 2
TIP
Put the Exhaust pipe 2 into the state as shown
by moving this, and then remove it.
1

REMOVING THE DRIVE SPROCKET

EAS2GB2231
1. Straighten the lock washer tab.
2. Remove:
• Nut (drive sprocket) "1"
• Lock washer "2"
TIP
Loosen the nut while applying the rear brake.
3. Remove:
• Drive sprocket "1"
• Drive chain "2"
TIP
Remove the drive sprocket together with the
drive chain.
6-6
ENGINE REMOVAL