Table of Contents
Advertisement
DOS venting
Setting the DOS
concentration level
To avoid damage to the dispensing system, make sure before
venting that the containers for cleaning agent and rinsing agent are
sufficiently filled and the dispensing siphons are screwed securely
to the containers.
DOS venting
Select
The dishwasher will now start the automatic venting process of the
dispenser system.
Dispensing system DOS venting
As soon as the process has finished,
successfully vented
Confirm the message with the OK button.
Please observe dispensing recommendations made by the
manufacturer of the agent.
Concentration
Select
Concentration levels are given as a percentage and can be set
between 0.01 and 2.00 %.
The concentration level set then applies to all programmes.
Display for DOS1:
Concentration
0,30
%
(0,01 - 2,00 %)
If a DOS G 60 module is connected to the dishwasher, the factory
set concentration level must be reduced by half.
Display for DOS2 Rinsing agent and DOS4:
Concentration
0,04
%
(0,01 - 2,00 %)
Use the arrow buttons (higher) (lower) to set the concentration
level you want and confirm your choice with the OK button.
and confirm your choice with the OK button.
will appear in the display.
Dispensing system DOS
will appear in the display.
and confirm your choice with the OK button.
Further settings
83
Advertisement
Table of Contents
