Table of Contents
Advertisement
Programme
sequence
indicator
Starting a programme
Press the Start/Stop button.
The Start/Stop button's LED will light up and the button's LED will
go out.
A programme can no longer be changed after it has been started.
A programme can either be interrupted (see "Interrupting a
programme") or cancelled (see "Cancelling a programme").
After the start of a programme the wash phase description and, for 10
Programme running
seconds
During the programme cycle the and arrow buttons can be used
to switch between the wash phase and the target temperature or the
actual temperature in the second line of the display.
The time remaining is shown in the third line of the display.
Universal
Main wash
Duration
, are shown in the display.
G
23
Min
Operation
53
Advertisement
Table of Contents
