D-Link DGS-3427 User Manual page 32

Figure 4- 2. Initial screen, first time connecting to the Switch
Press Enter in both the Username and Password fields. Then access will be given to enter commands after the command
prompt DGS-3426:4#, DGS-3427:4# or DGS-3450:4# as shown below:
There is no initial username or password. Leave the Username and Password fields blank.
NOTE: The first user automatically gets Administrator level privileges. ItAt least one Admin-level
user account must be created for the Switch.
xStack DGS-3400 Series Fast Ethernet Switch
Figure 4- 3. Command Prompt
21