D-Link DGS-3427 User Manual page 51

Configure the parameters listed below:
Parameter
Index
Server IP
Severity
Facility
UDP Port (514 or 6000-
65535)
Status
To set the System Log Server configuration, click Apply. To delete an entry from the System Log Server window, click
the corresponding X under the Delete heading of the entry you wish to delete. To return to the Current System Log
Servers window, click the
xStack DGS-3400 Series Fast Ethernet Switch
Description
Syslog server settings index (1-4).
The IP address of the Syslog server.
This drop-down menu allows you to select the level of messages that will be
sent. The options are Warning, Informational, and All.
Some of the operating system daemons and processes have been assigned
Facility values. Processes and daemons that have not been explicitly assigned a
Facility may use any of the "local use" facilities or they may use the "user-level"
Facility. Those Facilities that have been designated are shown in the following:
Bold font means the facility values that the Switch currently now.
Numerical
Code
0
1
2
3
4
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Type the UDP port number used for sending Syslog messages. The default is
514.
Choose Enabled or Disabled to activate or deactivate.
Show All System Log Servers
Facility
kernel messages
user-level messages
mail system
system daemons
security/authorization messages
messages generated internally by syslog line printer subsystem
network news subsystem
UUCP subsystem
clock daemon
security/authorization messages
FTP daemon
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)
link.
40