RADIUS Server
The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker. The Web Manager offers three windows.
Click Configuration > Port Access Entity > RADIUS Server > Authentic RADIUS Server to open the Authentic
RADIUS Server Setting window shown below:
Figure 8- 6. Authentic RADIUS Server and Current RADIUS Server Settings Table window
This window displays the following information:
Parameter
Succession
RADIUS Server
Authentic Port
Accounting Port
Key
Confirm Key
Status
xStack DGS-3400 Series Fast Ethernet Switch
Description
Choose the desired RADIUS server to configure: First, Second or Third.
Set the RADIUS server IP.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Set the RADIUS account server(s) UDP port. The default port is 1813.
Set the key the same as that of the RADIUS server.
Confirm the shared key is the same as that of the RADIUS server.
This allows the user to set the RADIUS Server as Valid (Enabled) or Invalid
(Disabled).
150