D-Link DGS-3427 User Manual page 175

To view the following window, click Security > SSL:
To set up the SSL function on the Switch, configure the following parameters and click Apply.
Parameter
SL Configuration
SSL Status
Cache Timeout (60-
86400)
SSL Ciphersuite
RSA with RC4 128 MD5
RSA with 3DES EDE
CBC SHA
DHS DSS with 3DES EDE
CBC SHA
RSA EXPORT with RC4
40 MD5
NOTE: Certain implementations concerning the function and configuration of SSL are not available
on the web-based management of this Switch and need to be configured using the command line
interface.
NOTE: Enabling the SSL command will disable the web-based switch management.
To log on to the Switch again, the header of the URL must begin with https://. Entering
anything else into the address field of the web browser will result in an error and no
authentication will be granted.
xStack DGS-3400 Series Fast Ethernet Switch
Figure 8- 26. SSL Configuration and Ciphersuite menu
Description
Use the pull down menu to enable or disable the SSL status on the switch. The
default is Disabled.
This field will set the time between a new key exchange between a client and a
host using the SSL function. A new SSL session is established every time the client
and host go through a key exchange. Specifying a longer timeout will allow the SSL
session to reuse the master key on future connections with that particular host,
therefore speeding up the negotiation process. The default setting is 600 seconds.
This ciphersuite combines the RSA key exchange, stream cipher RC4 encryption
with 128-bit keys and the MD5 Hash Algorithm. Use the pull down menu to enable
or disable this ciphersuite. This field is Enabled by default.
This ciphersuite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm. Use the pull down menu to enable or
disable this ciphersuite. This field is Enabled by default.
This ciphersuite combines the DSA Diffie Hellman key exchange, CBC Block
Cipher 3DES_EDE encryption and SHA Hash Algorithm. Use the pull down menu
to enable or disable this ciphersuite. This field is Enabled by default.
This ciphersuite combines the RSA Export key exchange and stream cipher RC4
encryption with 40-bit keys. Use the pull down menu to enable or disable this
ciphersuite. This field is Enabled by default.
164