D-Link DGS-3427 User Manual page 134

The page shown below is the IPv6 configuration window.
The following parameters can be set, for IP:
Parameter
Profile ID (1-6)
Type
Class
Flowlabel
Source IPv6 Mask
Destination IPv6 Mask
Click Apply to implement changes made.
xStack DGS-3400 Series Fast Ethernet Switch
Figure 7- 43. Access Profile Configuration window (IPv6)
Description
Type in a unique identifier number for this profile set. This value can be set
from 1 - 6.
Select profile based on Ethernet (MAC Address), IP or IPv6 address. This will
change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each
packet header.
Select IP to instruct the Switch to examine the IP address in each frame's
header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's
header.
Checking this field will instruct the Switch to examine the class field of the IPv6
header. This class field is a part of the packet header that is similar to the Type
of Service (ToS) or Precedence bits field in IPv4.
Checking this field will instruct the Switch to examine the flow label field of the
IPv6 header. This flow label field is used by a source to label sequences of
packets such as non-default quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by
checking the corresponding box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by
checking the corresponding box and entering the IP address mask.
123