D-Link DGS-3427 User Manual page 65

To enter an IP Interface into the Switch's Static/Default Route Settings window, click the Add button, revealing the
following window to configure.
The following fields can be set:
Parameter
IP Address
Subnet Mask
Gateway
Metric (1-65535)
Backup State
Click Apply to implement changes made.
xStack DGS-3400 Series Fast Ethernet Switch
Figure 6- 28. Static/Default Route Settings – Add window
Description
Allows the entry of an IP address that will be a static entry into the Switch's Routing
Table.
Allows the entry of a subnet mask corresponding to the IP address above.
Allows the entry of an IP address of a gateway for the IP address above.
Allows the entry of a routing protocol metric representing the number of routers
between the Switch and the IP address above.
The user may choose between Primary and Backup. If the Primary Static/Default
Route fails, the Backup Route will support the entry. Please take note that the
Primary and Backup entries cannot have the same Gateway.
54