Multicast Filtering Mode - D-Link DGS-3427 User Manual

Figure 7- 31. Setup Static Multicast Forwarding Table window
The following parameters can be set:
Parameter
VID
Multicast MAC Address
Port Settings
Click Apply to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the
corresponding X under the Delete heading. Click the Show All Multicast Forwarding Entries link to return to the Static
Multicast Forwarding Settings window.

Multicast Filtering Mode

Open the Forwarding Filtering folder and click on the Multicast Filtering Mode link to see the entry screen below:
xStack DGS-3400 Series Fast Ethernet Switch
Description
The VLAN ID of the VLAN the corresponding MAC address belongs to.
The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
Allows the selection of ports that will be members of the static multicast group
and ports that are either forbidden from joining dynamically, or that can join the
multicast group dynamically, using GMRP. The options are:
None - No restrictions on the port dynamically joining the multicast group.
When None is chosen, the port will not be a member of the Static Multicast
Group.
Egress - The port is a static member of the multicast group.
Figure 7- 32. Multicast Filtering Mode
110