Specifications (Multi Purpose Drawer); Loading Paper In The Stand/3 X 500 Sheet Paper Drawer; Specifications (Stand/3 X 500 Sheet Paper Drawer) - Sharp MX-M350U Operation Manual

LOADING PAPER
■ Loading transparency film
Be sure to load the transparency film with the white label side up. Make sure no image will be printed on the label.
Printing on the label may cause smudges on prints. Transparency film must be set in the portrait orientation.

Specifications (multi purpose drawer)

Name
Paper size/weight
Paper capacity
Dimensions
Weight
Specifications are subject to change for improvement without notice.

Loading paper in the stand/3 x 500 sheet paper drawer

Upper paper tray:
The upper tray is the same as the multi-purpose drawer. Use the upper tray according to the instructions for the
multi-purpose drawer on page 2-8.
Middle and lower paper trays:
Up to 500 sheets of SHARP recommended plain paper can be loaded in these trays. The method of loading paper
is the same as for paper tray 1 in the main unit. See the description (page 2-2).
NOTE
If the paper size or paper type is changed in either paper tray, the tray settings must be changed in system settings.
Refer to "
Setting the paper type and paper size

Specifications (stand/3 x 500 sheet paper drawer)

Name
Paper size/weight
Paper capacity
(ordinary paper)
Dimensions
Weight
2-10
Multi purpose drawer
See specifications of paper trays on page 2-3.
g/
500 sheets (80 m (20 lbs.)) of paper, 40 envelopes, 40 postcards, 40 sheets of
2
transparency film
654 mm (W) x 567 mm (D) x 144 mm (H)
(25-3/4" (W) x 22-21/64" (D) x 5-43/64" (H))
Approximately 11 kg or 24.3 lbs.
" on page .
2-5
Stand/3 x 500 sheet paper drawer
See specifications of paper trays on page 2-3.
g/
500 sheets (80 m (20 lbs.)) each
2
589 mm (W) x 630 mm (D) x 404 mm (H)
(23-3/16" (W) x 24-51/64" (D) x 15-29/32" (H))
Approximately 32.9 kg or 70.6 lbs.