3
Basic Operation
This chapter explains the following operations. For other functions, refer to the Advanced
Operation Guide.
•
•
•
•
•
•
•
•
•
Basic Copying Procedure
Turn the main power switch on ( | ). At the end of
1
warm-up, the Start indicator lights up green.
Set the original onto the platen. Be sure to set the
2
original by aligning it with the left rear corner of the
platen along the original size indicator plates.
For the method of setting originals in the optional document processor, see Setting Originals in
Note
the Document Processor on page 4-2.
Select the paper size. If Auto is displayed on the
3
message display, the paper of the same size as the
original is automatically selected.
Basic Copying Procedure
Zoom Copying
Duplex Copying
Collated Copying
Combined Copying
Interrupt Mode
Low Power Mode
Sleep Mode
Basic Printing Procedure
Ready to copy .
Auto
Auto
100%
1
3-1