Table of Contents
Advertisement
Operator settings
The operator settings feature allows you perform a scan of available networks, and to optionally lock to a particular network
returned by the network scan. To scan for available networks, set the Select operator mode from automatic to Manual then click the
scan button. This operation can take a few minutes and requires that the packet data session be disconnected prior to scanning.
A list of the detected 3G service carriers in your area is displayed.
Select the most appropriate 3G service from the list shown and click Apply.
When Select operator mode is set to Automatic, the router selects the most appropriate operator based on the inserted SIM card.
This is the default option and is sufficient for most users.
SIM security settings
The SIM security settings page can be used for authenticating SIM cards that have been configured with a security PIN.
Unlocking a PIN locked SIM
If the SIM card is locked, you will receive a notice when you access the Status page after which you will be directed to the PIN
settings page to enter the PIN. The PIN settings page lists the status of the SIM at the top of the page.
If you are not redirected to the PIN settings page, to unlock the SIM:
a)
Click on the Networking menu from the top menu bar, and then click SIM security settings.
NetComm Wireless NTC-40WV Industrial Indoor 3G Router with Voice
22
Figure 15 - Operator settings
Figure 16 - Detected operator list
www.netcommwireless.com
Ver 1.4
Advertisement
Table of Contents
