Table of Contents
Advertisement
ITEM
System information
System up time
Board version
Serial number
Firmware version
Model
Module firmware
IMEI
Hardware
LAN
IP
MAC address
Ethernet port status
Cellular connection status
SIM Status
Signal strength (dBm)
Network registration status
Operator selection
Current operator
Roaming status
Allowed bands
Current band
Coverage
WWAN connection status
Profile name
Status
Default profile
WWAN IP
DNS server
APN
Connection uptime
WLAN status
Status
Network Name (SSID)
Channel
Network authentication
Station Info
Advanced status
Mobile country code
Mobile network code
Signal quality (Ec/N0)
Received signal code power
(RSCP)
HSUPA category
HSDPA category
SIM ICCID
Primary scrambling code (PSC)
NetComm Wireless NTC-40WV Industrial Indoor 3G Router with Voice
14
The current uptime of the router.
The hardware version of the router.
The serial number of the router.
The firmware version of the router
The type of phone module and the firmware version of the module.
The firmware revision of the phone module.
The International Mobile Station Equipment Identity number used to uniquely identify a mobile device.
The hardware version of the module.
The IP address and subnet mask of the router.
The MAC address of the router.
Displays the current status of the Ethernet port and its operating speed.
Displays the activation status of the router on the carrier network.
The current signal strength measured in dBm
The status of the router's registration for the current network.
The mode used to select an operator network.
The current operator network in use.
The roaming status of the router.
The bands to which the router may connect.
The current band being used by the router.
The type of mobile coverage being received by the router.
The name of the active profile.
The connection status of the active profile.
Indicates whether the current profile in use is the default profile.
The IP address assigned by the mobile broadband carrier network.
The primary and secondary DNS servers for the WWAN connection.
The Access Point Name currently in use.
The length of time of the current mobile connection session.
Shows the current status of the wireless LAN network.
Shows the network name (SSID) of the wireless network.
Shows the channel that the wireless network is configured to operate on.
The type of security/encryption in use on the wireless network.
Click the Station Info link to be taken to the station information page providing more information on the wireless network.
The Mobile Country Code (MCC) of the router.
The Mobile Network Code (MNC) of the router.
A measurement of the portion of the received signal that is usable. This is the signal strength minus the signal noise level.
The power level of the signal on the current connection's particular channel.
Displays the HSUPA category (1-9) for the current uplink
Displays the HSDPA category (1-8) for the current downlink.
The Integrated Circuit Card Identifier of the SIM card used with the router, a unique number up to 19 digits in length.
The Primary scrambling code for the current signal.
DEFINITION
www.netcommwireless.com
Ver 1.4
Advertisement
Table of Contents
