WAB–3000 Wireless Access Point
Remote Configuration Upgrade
On the System Administration — System Upgrade screen, click on
the Remote Configuration Upgrade tab to upload and download config-
uration files to access points in remote locations which are not configured.
This remote configuration upgrade feature allows you to selectively
transfer a configuration file to other APs. Once the file is transferred, the
remote AP will be rebooted. Once the remote units are rebooted, the site
map can be updated and the File Tag will show the status of the units. If
the tag matches the local tag, the unit was updated successfully.
The random configuration file is used to update the bridging SSID
and bridging encryption on other devices using the existing bridging
link. If the bridging key or the bridging SSID is changed on the normal
configuration screen, then the bridging link to the other devices will be
terminated, and the configuration can not be updated.
54
Chapter 3: Access Point Configuration
29000171-002 A