Table of Contents
Advertisement
WAB–3000 Wireless Access Point
Wireless VLAN
When VLAN is enabled, all data coming out of the WAN port is
VLAN-tagged, which means an external network unit such as a router,
switch, or a VLAN-enabled computer has to be used to terminate the
VLAN traffic. Data originating from or targeting to a wireless network cli-
ent is tagged with the VLAN ID corresponding to an SSID it is associated
with. Data generated by an Access Point itself is tagged with the manage-
ment VLAN ID.
To create a new VLAN, enter a VLAN ID (range from 1 to 4094) and
an SSID. Set the security to None, Static WEP, or IEEE 802.11i and WPA.
After you create a VLAN you can modify it by selecting the VLAN
from the existing VLAN list.
29000171-002 A
Chapter 3: Access Point Configuration
37
Advertisement
Table of Contents
