Table of Contents
Advertisement
WAB–3000 Wireless Access Point
Security
Click the entry on the left hand navigation panel for Wireless Access
Point — Security. This directs you to the Wireless Access Point — Secu-
rity screen.
The default factory setting for the WAB–3000 in gateway mode is no
encryption but for security reasons it will not communicate to any clients
unless the encryption is set by the CryptoOfficer. It is recommended that
you set encryption as soon as possible.
Gateway mode has the same encryption options as the AP mode.
Firewall
Content Filtering
Click the entry on the left hand navigation panel for Firewall — Con-
tent Filtering. The Content Filtering screen allows the system adminis-
trator to identify particular hosts or IPs that will be blocked from access
by the gateway. Simply input the IP address and click Add.
Entries can be added as:
• Individual IP addresses (192.168.204.10)
• IP address range (192.168.204.0/24)
• Exact URL (www.yahoo.com)
• Wildcard URL (*.gov)
29000171-002 A
Chapter 4: Gateway Configuration
65
Advertisement
Table of Contents
