WAB–3000 Wireless Access Point
Security
The Wireless Access Point — Security screen displays a default
factory setting of no encryption, but for security reasons it will not com-
municate to any clients unless the encryption is set by the CryptoOfficer.
There are different encryption options for the AP. The following chart
shows the differences:
No Encryption
In order to the WAB–3000 with no encryption, you must actively
select None and click Apply. A screen will appear, asking if you really
want to operate in Bypass mode. If you answer Yes, no encryption will be
applied.
29000171-002 A
Encryption Options
None
802.11i and WPA
(Preshared Key or 802.1x us-
ing Radius Server, and TKIP or
AES-CCMP)
Static WEP
Chapter 3: Access Point Configuration
33