Minimum System And Component Requirements; Cabling - LevelOne WAB-3000 User Manual

108mbps mesh ap/bridge w/ multi-ssid, vlan
Hide thumbs Also See for WAB-3000:
Table of Contents

Advertisement

WAB–3000 Wireless Access Point

Minimum System and Component Requirements

The WAB–3000 is designed to be attached to the wall at appropriate
locations. To complete the configuration, you should have at least the fol-
lowing components:
• PCs with one of the following operating systems installed: Win-
dows NT 4.0, Windows 2000 or Windows XP;
• A Wi-Fi compatible 802.11a/b/g device for each computer that
you wish to wirelessly connect to your wireless network.
• Access to at least one laptop or PC with an Ethernet card and
cable that can be used to complete the initial configuration of the
unit.
• A Web browser program (such as Microsoft Internet Explorer 5.5
or later, or Netscape 6.2 or later) installed on the PC or laptop you
will be using to configure the Access Point.
• TCP/IP Protocol (usually comes installed on any Windows PC.)

Cabling

The following illustration shows the external cable connectors on the
WAB–3000.
29000171-002 A
Chapter 2: Hardware Installation
15

Advertisement

Table of Contents
loading

Table of Contents