General Notes - Novexx Solutions 64- series User Manual

General Notes

GB
Symbols in the text
You will see that some symbols have been
added on the left-hand margin of the text.
These are designed to help you through the
text and have the following meanings:
WARNING!
Safety note when working on or using the
device. You must observe these warnings.
Failure to do so may result in injury!
CAUTION! - Advice when working on or
using the device. Failure to observe this ad-
vice may result in material damage!

Advice on working on or using the device.
Please pay attention to this advice.
1. First step of an instruction. Follow the numbe-
ring.
¤
Reference to additional documentation on the
CD-ROM delivered with the printer.
CD
Proper usage
64-xx printers are designed for printing label
material, using the thermal or thermal transfer
printing process. It is possible to use a wide
range of label materials and thermal transfer
ribbons, which must both be supplied in
shape of rolls.
The actual stipulated usage is detailed in the
technical specifications of the respective
devices.
¤
User manual 64-xx, topic section „Specifi-
cations".
CD
NOVEXX Solutions assumes no liability for
damage due to improper use of the printer.
Qualifications required
– Trained staff is required for inserting and
changing foils and material.
– Users need to be instructed in the use of
the printer so they can work safely and
independently.
– Users should be able to resolve minor ope-
rational issues and faults by themselves.
– At least two users should be instructed.
6
Safety notes
WARNING!
Safe and efficient operation of the printer can
only be guaranteed if you observe all neces-
sary information.
– Before operating the printer, read the ope-
rating instructions and all other notes
carefully.
– Observe the additional safety and warning
notes on the machine.
– Only operate the printer using the system
voltage indicated on the nameplate!
– Only connect the printer to a grounded
power socket fitted to authorized stan-
dards!
– Make sure that the power supply socket
for the printer is readily accessible!
– Only use the printer in enclosed areas with
normal environmental conditions (stan-
dard office temperatures)!
– Only operate the printer when the cover is
closed!
– Only trained and authorized personnel
should operate the printer!
– During operation, the printhead can
become hot! Care should be taken when
touching the printhead!
– Do not make any modifications or any
additional casing for the printer!
– Do not allow any liquids to enter into the
printer!
– Repairs to the printer may only be perfor-
med by authorized specialists who are
aware of the risks involved!
– In case of emergency, switch off the prin-
ter and disconnect the power supply
cable!
– Before cleaning, switch off the printer and
disconnect from the power!
– Only use original accessories!
– Connect the printer only to devices that
fulfil SELV (safety extra-low voltage) cir-
cuit requirements to EN 60950!
– Keep long hair, loose jewellery, long slee-
ves, etc. away from rotating parts of the
printer!