Using Your Ceiling Fan - Emerson CF717BS01 Owner's Manual

BP7483-2 ASHLAND CF717.qxp_BP7483 12/15/15 9:55 AM Page 21
12. Installation of Light Kit Assembly
12.8
Cut the speed control switch pull chain and the light switch
pull chain to the desired lengths.
Attach each pendant/coupling assembly (supplied) to the
ends of each pull chain using the attached coupling
(Figure 35).
Please call Emerson
1-800-654-3545
about installation and operation of this ceiling fan.
13.1
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
Check the operation of the light by gently pulling on the
light switch pull chain (Figure 36).
Check the operation of the fan by gently pulling on the
speed control switch pull chain (Figure 36).
The operation sequence is as follows:
1st pull - High
2nd pull - Medium
Your fan is shipped from the factory with the reversing
switch positioned to circulate air downward. If airflow is
desired in opposite direction, turn the fan off and wait for
the blades to stop turning, then slide the reversing switch
to the opposite position, and turn the fan on again
(Figure 36). The fan blades will turn in the opposite
direction and reverse the airflow.
technical support
if you have any questions

13. Using Your Ceiling Fan

3rd pull - Low
4th pull - OFF
at
LIGHT CONTROL
SWITCH PULL CHAIN
COUPLING
SMALL WOOD
PENDANT
Figure 35
LIGHT CONTROL
SWITCH PULL
CHAIN
Figure 36
Please contact 1-800-654-3545 for further assistance
21
(Continued)
SPEED CONTROL
SWITCH PULL CHAIN
COUPLING
LARGE WOOD
PENDANT
REVERSING
SWITCH
SPEED CONTROL
SWITCH PULL
CHAIN
emersonfans.com
ETL Model No.: CF717-1