Emerson CF717BS01 Owner's Manual page 19

BP7483-2 ASHLAND CF717.qxp_BP7483 12/15/15 9:55 AM Page 19
12. Installation of Light Kit Assembly
12.4
Screw the three 13-watt (maximum) medium CFL base
bulbs in the light kit assembly sockets (Figure 31).
Over lamping the fan will result in the lamps being
automatically shut off. Use only 13-watt maximum
medium CFL base bulbs. Turn off the electricity before
replacing the bulbs.
To avoid risk of burns or other injuries, turn power off
and allow lamps to fully cool before attempting to replace
the medium CFL base bulbs.
12.5
NOTE: Be sure that the fan switch chain does not
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch chain
from touching the light bulbs (Figure 32).
WARNING
!
WARNING
!
Figure 31
Figure 32
Please contact 1-800-654-3545 for further assistance
19
(Continued)
13-WATT (max.)
MEDIUM CFL
BULBS (3)
LIGHT KIT
ASSEMBLY
SOCKETS (3)
FAN SPEED
CONTROL SWITCH
LIGHT KIT FITTER PLATE
emersonfans.com
ETL Model No.: CF717-1