Samsung iDCS500
CALLING OTHER EXTENSIONS
1. Dial the extension number or group number.
2. Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the extension you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
3. Finish the call by replacing the handset or pressing the ANS/RLS key.
Note:
•
If you have a DSS key assigned to an extension or an extension group, you
can press this key instead of dialling the number.
•
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the SPEAKER key before you begin dialling.
ANSWERING INTERNAL CALLS
Your keyset can answer internal calls in one of three modes: Ring, Voice
Announce or Auto Answer. Ring mode is the default mode.
RING MODE
n
1. When your keyset rings, simply lift the handset
OR
Press the ANS/RLS key to be connected to the calling extension.
2. Finish the call by replacing the handset or pressing the ANS/RLS key.
See
Ring Preference
VOICE ANNOUNCE MODE
n
When another extension calls you, your keyset will sound a brief attention
tone and you will hear the caller's announcement.
1. Press the ANS/RLS key to turn on the microphone and speak hands-
free.
OR
Lift the handset to reply.
INTERNAL CALLS
in the section "Customising Your Keyset".
DCS (Euro) Keyset User Guide
– 12 –