Pulse To Tone Changeover; Memo Dialling ('L' Version Systems Only) - Samsung iDCS500 User Manual

Samsung iDCS500
§
When you hear a busy signal, press the RETRY key.
The system will reserve the line and automatically redial the same number for
you. You will hear the call being made through the speaker. The microphone
is muted.
§
When the called party answers, you must pick up the handset or press
the SPEAKER key to begin speaking.
Note:
•
If you make another call, auto-redial is cancelled.
•
To cancel a retry, lift and replace the handset.

PULSE TO TONE CHANGEOVER

When making an outside call on a dial pulse line, press #. All digits dialled
after the # will be sent as tones.
MEMO DIALLING
('L' VERSION SYSTEMS ONLY)
When, during an outside call, you are enquiring for a phone number or taking
a message, you can store the number or message you are given as a
"memo" for later use. There is no need to write it down.
1. While on an outside call, press the MEMO soft key.
2. Dial the number or type the message (using the keypad) as it is dictated
to you.
3. Press the RETURN soft key to save the number/message.
When your conversation is finished and the handset replaced, you can view
the number/message you saved:
1. Dial TRSF 113.
2. Use the VOLUME keys to scroll through the numbers/messages saved as
memos.
DCS (Euro) Keyset User Guide
– 32 –