Conference Calls - Samsung iDCS500 User Manual

Samsung iDCS500
O
:
R
•
Finish the current call and hang up. The waiting call will ring. Lift the
handset or press the ANS/RLS key to answer.
(If you put a call on hold to answer the waiting call, you can retrieve the held
call by pressing the flashing CALL key when you have finished the camped-
on call.)
Note: Internal calls will not go on Automatic Hold.

CONFERENCE CALLS

You may connect up to five parties (you and four others)—in any combination
of outside lines and extensions —in a conference call, in any order.
1. While engaged in a conversation with the first party, press the CONF key
or CONF soft key.
OR
Press the TRSF key and dial 46. You receive conference tone.
2. Make another call (internal or external) and press the CONF key, OR the
CONF soft key, OR the TRSF key and receive conference tone.
3. Make another call OR press the CONF key, OR the CONF soft key, OR
the TRSF key to join all parties.
4. Repeat step 3 until all parties are added.
Note: When attempting to add another party to the conference and you are not
able to reach the desired person, hang up. Press the CONF key again to return to
your previous conversation.
To Drop a Party From Your Conference Call:
1. Press the CONF key or the CONF soft key and dial the extension or line
number that is to be dropped.
2. Press the CONF key or the CONF soft key again to re-establish the con-
ference without the dropped number.
LEAVING A CONFERENCE YOURSELF
To leave a conference, hang up. Control is passed to the next internal exten-
sion. If there are no internal extensions and you wish to leave outside lines
connected together in a trunk to trunk ('unsupervised') conference, press the
CONF key then the CALL key that the call appears on, or press the CONF
DCS (Euro) Keyset User Guide
– 20 –