Calling Your System Operator; Barge-In On An Extension - Samsung iDCS500 User Manual

Dcs (euro) keyset

Hide thumbs Also See for iDCS500:

Table of Contents

Samsung iDCS500

CALLING YOUR SYSTEM OPERATOR

Dial the appropriate system code to call your system operator or group of

operators. This is normally 0 or 9.

If you want to call a specific operator, dial that person's extension num-

ber.

Note: If the Hot Keypad feature has been turned off, you must first lift the handset

or press the SPEAKER key before you begin dialling.

The Barge-In feature allows you to barge in on a conversation currently in

progress at another extension. Barge-in is an optional feature and your key-

set must be programmed to allow it to access this feature. See your system

administrator if you require this.

If you dial an extension which is busy, press the BARGE key—or the

SCROLL key and then the BARGE-IN soft key—to barge in on the conversa-

tion.

Note: You can only barge in on extensions that are programmed to permit barge in.

Otherwise, you will receive a 'barge-in failed/not allowed' mes sage.

DCS (Euro) Keyset User Guide

– 15 –

Table of Contents