Inter-Tel EncoreCX Basic Installation Instructions page 2

Step 3
Mount the CCU on the first bracket
The CCU is mounted on the bracket by sliding it on from the left-hand side. There are two marks on
the right-hand side of the CCU. Line these up with the inside edge of the last flange on the bracket
and slide the CCU to the right. When you slide the CCU fully to the right it is automatically locked
in place.
To remove the CCU, depress the lock located on the left-hand side of the wall bracket and slide the
CCU to the left.
Lock
Step 4
Install the backplane and secure it to the wall bracket
If the unit is equipped with expansion modules (Extension or Internet Router) the expansion
backplane must be installed on the second wall bracket and secured to it with the mounting screw
provided. Remove the fourth and fifth covers to locate the mounting screw hole.
IMPORTANT: The backplane must be secured to the wall bracket using the mounting screw
to ensure it is securely locked in place and does not move when modules are being installed.
Mounting screw
hole
Page 2