Checking The Machine Daily; Checking The Air Pressure In The Tires - Toro 30344 Operator's Manual

Closing the Hood
Figure 26
Figure 27
1. Lock

Checking the Machine Daily

Check the following machine systems each day before
operating the machine:
•
Air Cleaner Indicator; refer to
Indicator (page 40)
•
Engine oil; refer to
41)
•
Coolant system; refer to
and Coolant Level (page 53)
•
Hood screen and radiator;
and Radiator for Debris (page 54)
•
Hood screen and radiator; refer to
Screen and Radiator for Debris (page 54)
•
Hydraulic system; refer to
System and Fluid Level (page 60)
Checking the Air Pressure in
the Tires
Service Interval: Before each use or daily
Tire air pressure specification (front and rear tires): 138
kPa (20 psi).
DANGER
Low tire pressure decreases machine side-hill
stability. This could cause a rollover, which may
result in personal injury or death.
Do not underinflate the tires.
Check the air pressure in the front and rear tires. Add or
remove air as needed to set the air pressure in the tires to the
tire air pressure specification.
Important: Maintain pressure in all tires to ensure a
good quality of cut and proper machine performance.
Check the air pressure in all the tires before operating
the machine.
26
Checking the Air Cleaner
Checking the Engine-Oil Level (page
Checking the Cooling System
Checking the Hood Screen
Checking the Hood
Checking the Hydraulic
Figure 28