Maintenance; Recommended Maintenance Schedule(S) - Toro 30344 Operator's Manual

Maintenance

Note: Looking for an Electrical Schematic or Hydraulic Schematic for your machine? Download a free copy of the schematic by
visiting www.Toro.com and searching for your machine from the Manuals link on the home page.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first hour
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 1,500 hours
Monthly
Maintenance Procedure
• Torque the wheel-lug nuts.
• Torque the wheel-lug nuts.
• Check and adjust the service brakes.
• Check the tension on the alternator belt.
• Check the tension on the PTO belt.
• Change the hydraulic fluid filter.
• Change the engine oil and filter.
• Check and adjust the service brakes.
• Check the tension on the PTO belt.
• Check the air pressure in the tires.
• Check the Interlock System.
• Check the air cleaner indicator.
• Check the engine-oil level.
• Check the cooling system and the coolant level.
• Check the hood screen and radiator for debris.
• Check the hydraulic system and fluid level.
• Grease the bearings and bushings.
• Inspect the air-cleaner element.
• Check the battery cable connections.
• Check the battery electrolyte level when in operation.
• Lubricate the brake cables.
• Change the engine oil and filter.
• Torque the wheel-lug nuts.
• Check the rear axle lubricant (Model 30345 only).
• Check the bidirectional clutch lubricant (Model 30345 only).
• Check the rear wheel alignment.
• Torque the bolts for the steering-cylinder mount (Model 30345 only).
• Inspect the cooling-system hoses.
• Check the condition of the alternator belt.
• Check the tension on the alternator belt.
• Check the condition of and tension on the PTO belt.
• Adjust the PTO clutch gap.
• Change the hydraulic fluid filter.
• Grease the rear-axle bearings
• Replace the primary air-cleaner element(s) (earlier if the air cleaner indicator shows
red, and more frequently in extremely dirty or dusty conditions). Replace the safety
filter after every 3 primary air-cleaner element replacements.
• Replace the fuel-filter canister.
• Drain and clean the fuel tank
• Inspect the fuel lines and connections.
• Change the rear-axle lubricant (Model 30345 only).
• Change the bidirectional-clutch lubricant (Model 30345 only).
• Replace any moving hoses.
• Flush and replace the cooling-system fluid.
• Replace the hydraulic fluid.
• Check the battery electrolyte level when in storage.
34