Add-On Wait Mode - Opticon NFT 2100 User Manual

Manual No. 25-ULNFT2100-01; Mar, 2005
Scanner
27. Add-on Wait Mode (Applies to UPC/EAN only)
Computer
Command
(ZZ)
XA
XB
XC
XD
These commands are used when UPC/EAN when add-on is enabled. The reader searches within the
selected time for a valid add-on code. If a valid add-on code is found, the reader transmits the data
immediately. If nothing is found behind the code, the reader will transmit the data without the add-on.
Function
/Description
START/END
Programming Menu
Disable Add-on wait mode
Enable Add-on wait mode of
0.25 seconds
Enable Add-on wait mode of
0.50 seconds
Enable Add-on wait mode of
0.75 seconds
NFT 2100 CCD Fixed Mount Barcode
Bar Code
Command
[[
YB
YC
YD
YE
Page 58