Opticon NFT 2100 User Manual page 25

Manual No. 25-ULNFT2100-01; Mar, 2005
Scanner
YO Margin check 1/7 nominal
YP Margin check 2/7 nominal
YQ Margin check 3/7 nominal
YR Margin check 4/7 nominal
YS Margin check 5/7 nominal
YT Margin check 6/7 nominal
YU Margin check normal
Redundant Decoding
X2 Read bar code 3 times before transmitting
X3 Read bar code 4 times before transmitting
Xmit Error (Trigger Enabled Mode only)
TH User defined error message for no label
TI User defined error message for no decode
TG Clear error messages for no label, no decode
ACK/NAK response to Host transmissions
WD No response to command
Response to command – OK=ACK,
WC
ERROR=NAK
Good Read LED Operation
NFT 2100 CCD Fixed Mount Barcode
T4 Disable good read LED (GRL)
T5 GRL ON for 0.20 seconds after decode
T6 GRL ON for 0.40 seconds after decode
T7 GRL ON for 0.80 seconds after decode
Page 22