Opticon NFT 2100 User Manual page 60

Manual No. 25-ULNFT2100-01; Mar, 2005
Scanner
Mode
bar codes in succession until it times
Multiple
Read
(S1)
Scanner may not read the same bar
Scanner will read the same bar code
Continuous
continuously after receiving a trigger
Read
pulse until the label is removed. The
(S2)
Scanner will read only one bar code
Single
Read
scanner time out is terminated on a
(S0)
Trigger Function Enabled (S8)
After receiving a trigger pulse,
scanner will read multiple, different
out. (Each read will reset the
scanner's time out)
code twice if they are consecutive.
(See Sect. 32)
LEDs then time out.
after receiving a trigger pulse. The
good read.
NFT 2100 CCD Fixed Mount Barcode
Trigger Function Disabled (S7)
Scanner will read different bar codes
in succession if they are presented to
the read window.
Scanner may not read the same bar
code twice if they are consecutive.
(See Sect. 32)
Scanner will read the same bar code
continuously.
Same as Multiple Read mode, above.
Page 57