Table of Contents
Advertisement
The monitor must be switched off. Press and hold 'M' for three seconds.
1
The initial display is shown briefly. The average value for seven days is
2
displayed. Press 'M' again several times to display the averages for 14, 21,
28, 60 and 90 days.
If you press 'M' again after the average for 90 days, the monitor will show
3
the average for seven days again.
You can cancel the procedure at any time. Press the ON/OFF button or wait
4
until the monitor switches off automatically after three minutes.
1: Result symbol
2: Number of days, e.g. 7
3: Average value
4: Number of blood glucose tests
during the period, e.g. 28 tests
5: Memory symbol
8.3 Deleting stored values
The monitor must be switched off.
1
Press the 'SET' button eight times slowly.
2
Press 'M'. dEL and the memory symbol
3
Press 'M' again.
4
CLr ALL is displayed briefly, then OFF and the monitor automatically switches off.
5
Beurer BGL40 mg/dL
1
2
blink on the display.
3
4
5
39
Advertisement
Table of Contents
