Table of Contents
Advertisement
No.
Cause
Err 08
Cuff pressure out of range
Err 09
Cuff pressure is insufficient
even at maximum pump
pressure
Err 17
No pulse detectable
Err 32
Error! Too much
movement during
measurement
Problem: The monitor does not switch on.
Cause
Low batteries
Battery missing or not
installed correctly
Test strip is
incompletely inserted
or wrong way around
Faulty monitor
Beurer BGL40 mg/dL
Remedy
Repeat test and do not move or talk
during the test.
The blood pressure exceeds the
measurement range. Repeat
measurement. if the problem persists,
seek medical advice.
Repeat measurement. if the problem
persists, seek medical advice.
Do not move or speak during
measurement.
Remedy
Replace batteries.
Check that the batteries are correctly installed (see
"4.1 Inserting and replacing batteries" page 18).
Insert a test strip into the monitor with the contacts
first. Make sure that the front of the test strip is facing
you (see "3.3 Test strips" page 16).
Contact Customer Service.
42
Advertisement
Table of Contents
