Beurer BGL40 Instructions For Use Manual page 33

Unscrew the cap from the lancing device.
1
Insert a sterile lancet into the lancing device and
2
press the lancet into position.
Unscrew the safety shield from the lancet while
3
holding the lancet shaft firmly. Keep the safety shield
so the used lancet can be safely discarded after
taking the blood sample.
Different caps are required depending where you
4
take the blood sample.
Fingerprints: cap (grey).
Other parts of the body: AST cap (transparent).
Place the selected cap on the lancing device and
screw it on tightly.
Five different puncture depths can be set on the
5
lancing device.
•
•
•
Rotate the cap in the appropriate direction until the
arrow indicates the desired puncture depth.
Beurer BGL40 mg/dL
1 to 2: soft or thin skin
3: normal skin
4 to 5: thick or calloused skin
31