Table of Contents
Advertisement
Handling test strips
Note
• Before using the strips for the first time check that the seal on the
container is intact. If a container seal is damaged, do not use the test
strips.
• Close container tightly immediately after removing a test strip.
• Do not use test strips after the use-by date. If expired test strips are
used, test results may be inaccurate. The use-by date can be found
on the container beside the hourglass icon .
• The test strips can be stored for up to three months after opening the
container. Write this use-by date (date of opening + 3 months
the label. The storage time is reduced if it extends beyond the use-by
date (see date beside the hourglass icon ).
• Do not use the test strips if one of the use-by dates ( /
expired.
• The test strips can be touched anywhere with clean, dry hands.
• Use the test strip for measurement immediately on removal from the
container.
• Do not bend, cut or alter test strips in any way.
• Do not use test strips for measurements if they have come into
contact with liquids.
Storing test strips
Note
• Store test strips in a cool, dry place above +4°C and below +40°C.
Keep test strips away from direct sunlight or heat. Do not store in a
refrigerator.
• The relative humidity must be between 10% and 85%.
• Store test strips in their original container – never place them in a
different container.
Beurer BGL40 mg/dL
) on
) has
17
Advertisement
Table of Contents
