4 O
PERATION AND
4.1 Inserting and replacing batteries
Note
Two batteries are included with your blood glucose and blood pressure
monitor. The batteries are in the bag.
Remove the battery cover from the base of the instrument
1
When you replace batteries, always replace both batteries. The monitor
2
retains the date and time while the batteries are replaced. Reset the date
and time if the battery replacement takes longer than usual (see "4.2
Making basic settings" page 18).
Insert two new AAA 1.5 V alkaline batteries. Make absolutely sure that you
3
insert them with the correct polarity as marked. Do not use rechargeable
batteries.
Replace the battery cover carefully
4
If the 'change battery' symbol
batteries as soon as possible.
The display shows E-b if the batteries are so flat that readings cannot be
taken.
Beurer BGL40 mg/dL
B
S
ASIC
ETTINGS
appears, the battery is almost flat. Replace all
18