Table of Contents
Advertisement
Installation notes
1. During the installation of this driver, DISPLAY.LOG and
DSPINSTL.LOG files are created in the \OS2\INSTALL directory.
These files identify the OS/2 system files that were updated, and
indicate whether the installation was successful. the
DISPLAY.LOG file also contains a string that identifies the version
of driver that was installed. This information may be important
when reporting an installation problem.
2. During installation, DSPINSTL will invoke the SVGA
Configuration program SVGA.EXE to determine the hardware
configuration, and create the file \OS2\INSTALL\SVGADATA.PMI.
If this file is not created, the adapter will not be supported. When
this step is done, the display will be blanked out. You may see a
series of flashes on the display and/or what appears to be a
"corrupted" display. This is normal, as the configuration process is
performing Video BIOS mode sets to determine which screen
resolutions BIOS supports. This configuration information is then
used to provide the Systems-Settings Resolution and Refresh
selections.
Chapter 4 PCI SVGA Setup
49
Advertisement
Table of Contents
