Table of Contents
Advertisement
4.4.1 Windows setup
These drivers are designed to work with Microsoft Windows 3.1. You
may install these drivers through Windows or in DOS.
Step 1: Install Windows as you normally would for a VGA display.
Run Windows to make sure that it is working correctly.
Step 2: Place the display driver diskette in drive A. In Windows
Program Manager, choose File from the Options Menu. Then from the
pull-down menu, choose Run . . . . At the command line prompt, type
A:\setup. Press the <ENTER> key or click OK to begin the installa-
tion. At this point the setup program locates the directory where
Windows is installed. For proper operation, the drivers must be
installed in the Windows subdirectory. Press <ENTER> to complete
the installation. Once completed, the Display Driver Control Panel
appears on the screen. This Control Panel allows you to select and
load the installed drivers.
Another method of installing these drivers is through the File Manager.
Click on Drive A:. Then double-click on SETUP.EXE to begin
installation.
Changing Display Drivers in Windows
To change display drivers in Windows, select the Windows Setup icon
from the Main window. You will be shown the current setup configura-
tion. Select Change System Settings from the Option menu. Click on
the arrow at the end of the Display line. You will be shown a list of
display drivers. Click on the driver you want. Then click on the OK
button. Follow the directions to complete the setup.
Changing Color Schemes
After you change display drivers, you may notice that the color scheme
used by Windows looks strange. This is because different drivers have
different default colors. To change the color scheme, select the
Control Panel from the Main window. Select the Color icon. You will
be shown the current color scheme. Choose a new color scheme and
click the OK button.
PCA-6155V User's Manual
42
Advertisement
Table of Contents
