Table of Contents
Advertisement
4. After restarting the system:
a) Open the OS/2 System folder.
b) Open the System Setup folder.
c) Open the Display Driver Install Object.
Steps a), b) and c) will execute the Display Driver Installation
(DSPINSTL) utility program to finish installation of the new
drivers.
d) When the Display Driver Install window appears, select
Primary Display and then select OK.
e) When the installation is complete, you will need to shut down
and then restart the system for the changes to take effect. Make
sure you remove the install diskette before restarting the
system.
When the system has restarted, the display driver will be initialized for
640 x 480 x 256 color, 60 Hz refresh. To switch to a different video
resolution color depth or a different refresh rate, see the following
sections:
Chapter 4 PCI SVGA Setup
47
Advertisement
Table of Contents
