Sprayer Functions For Application Rate Mode And Manual Mode; Spraying With The Excelarate Sprayer System - Toro Multi Pro 5800-D Operator's Manual

the chemicals and possible damage to the sprayer
components.
CAUTION
Chemicals are hazardous and can cause
personal injury.
• Read the directions on the chemical labels
before handling the chemicals and follow
all manufacturer recommendations and
precautions.
• Keep chemicals away from your skin.
Should contact occur, wash the affected
area thoroughly with soap and clean water.
• Wear appropriate personal protective
equipment (PPE) per the chemical
manufacturer's instructions.
The Multi Pro ® Sprayer is specifically designed for
high durability, provides the long sprayer life. Different
materials have been chosen for specific reasons at
different locations on your sprayer to meet this goal.
Unfortunately, there is no single material which is
perfect for all foreseeable applications.
Some chemicals are more aggressive than others
and each chemical interacts differently with various
materials. Some consistencies (e.g., wettable
powders, charcoal) are more abrasive and lead to
higher wear rates. If a chemical is available in a
formulation that would provide increased life to the
sprayer, use this alternative formulation.
As always, remember to clean your sprayer and spray
system thoroughly after all applications. This ensures
that your sprayer has a long and trouble-free life.
Note:
If you have questions or need additional
information regarding the spray-control system, refer
to the Operator's Manual supplied with the system.
Sprayer Functions for
Application Rate Mode and
Manual Mode
Refer to the Software Guide for the Multi Pro 5800-D
and 5800-G turf sprayers with ExcelaRate spray
system for information on the following:
Before Operation
•
The InfoCenter home screen
•
The main menu screen
•
The main menu sub-screens
•
The service screens
•
The diagnostic screens
•
The About screens
During Operation
•
Entering job information
•
InfoCenter spray-area screens
•
InfoCenter advisories
Spraying with the
ExcelaRate Sprayer System
Refer to the Software Guide for the Multi Pro 5800-D
and 5800-G turf sprayers with ExcelaRate spray
system for information on the following procedures:
Important:
To ensure that the product remains
well mixed, use the agitation feature whenever
you have solution in the tank.
Spraying in the Application Rate
Mode
1. Ensure that the spray system is calibrated
for the active spray nozzles that you have
selected; Refer to the Software Guide for the
Multi Pro 5800-D and 5800-G turf sprayers with
ExcelaRate spray system.
2. Rotate the knob for the section-bypass shutoff
valve to the closed position
1. Section-bypass shutoff valve (closed position)
3. Set the sprayer mode button to the Application
Rate Mode (Figure
34
(Figure 34).
Figure 34
35).
g192607