Saddle Adjustment - Argon 18 MY2016 Nitrogen Pro Assembly Manual

NITROGEN PRO: 10. Saddle Adjustment
3h
1. Install the saddle on the rocker (3b)
and tighten the rail clamp (3c) up to
6Nm using the half-moon bolt (3i).
2. Adjust the angle and the offset of the
3i saddle by hand tightening the thumb
screw (3h).
3. The rocker (3b) can be flipped to
3c
change the saddle offset (+ / - 5mm).
3b
6Nm
33