Argon 18 MY2016 Nitrogen Pro Assembly Manual page 26

NITROGEN PRO: 7. Cable Housing Installation
KEB cable housing
4
5
Rear brake
Remove the 2 cable stopper (on the
head tube and near the seat collar).
Font section: Measure the necessary
cable housing to ensure proper rotation
of the handlebar. Insert the "KEB" cable
housing and the cable trough the top
tube.
Rear section: With a magnet, get the
rear brake cable out of the frame, and
pass it through the rear cable stopper.
Mesure the "KEB" rear housing correctly
to avoid interference with the rider's
left leg.
25