Format Hdd - Konica Minolta bizhub c650 User Manual

Specifying Utility mode parameters

Format HDD

The hard disk can be formatted.
1
2
3
C650
Downloaded From ManualsPrinter.com Manuals
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
– To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the
Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
Note
The encryption key must be registered by the machine's administrator.
The encryption key must contain 20 characters.
Do not specify an encryption key that contains the same character repeated 20 times.
Be sure to keep the specified encryption key in a safe place so that it will not be lost.
Reminder
When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to
turn on the machine after turning it off; otherwise, the machine may not function correctly.
Note
When the hard disk is formatted, the data saved on the hard disk is erased.
Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 7-4.
Touch [6 HDD Setting] in the Security Setting screen.
Touch [Format HDD] in the HDD Setting screen.
A confirmation message appears, asking whether or not to format the hard disk.
7
7-37