Specifying Utility mode parameters
HDD Encryption Setting
If the security kit is installed, the machine can be set to encrypt the hard disk.
!
1
2
3
4
5
6
C650
Downloaded From ManualsPrinter.com Manuals
Reminder
Be sure to keep the specified password in a safe place so that it will not be lost.
Detail
[HDD Encryption Setting] appears when security kit SC-503 is installed.
If the encryption key is specified or changed, data saved on the hard disk may no longer be available.
Touch [Security Settings] in the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 7-4.
Touch [6 HDD Setting] in the Security Setting screen.
Touch [HDD Encryption Setting] in the HDD Setting screen.
A message appears, requesting confirmation to specify the setting.
To encrypt the data, touch [Yes], and then touch [OK].
The HDD Encryption Setting screen appears.
Using the control panel keypad or the keyboard that appears in the touch panel, type in the new
encryption key. To delete the entered encryption key, press the [C] (clear) key.
The HDD Encryption Setting screen appears again.
Follow the instructions in the screen to restart the machine.
7
7-36